LAUNCH X431 CRP129E V3.0 Elite OBD2 Code Reader Scanner Universal Car Diagnostic Tool
LAUNCH CRP129E V2.0 New OBD2 Scanner Code Reader Lifetime Free Update
Top Reasons to get LAUNCH X431 CRP129E V2.0 OBD2 Scanner?
1.Four System Diagnosis of overseas mainstream vehicles: ABS System , SRS Airbag System, Engine System and Transmission System.
2. Added More Reset Service from 8 to 12 : Reset SAS, Reset Oil, Reset Brake, Reset DPF, Reset BMS, Reset Electronic Throttle, TPMS Service, Injector Coding, Reset Bleed, Reset AdBlue, Reset AFS, A/F.
3. Lifetime Free Update via Wifi.
4. Support all OBD functions.
5. Support automatic generation of uploading of diagnostic report.
6. Battery Voltage Testing and Graphing.
7. Support Auto VIN Scan + Dignostic Feedback + Screenshot + email sharing + Data recording and playback + fault code library.
8. 11 Language English, French, Spanish, German, Korean, Japanese, Portuguese, Italian, Chinese Traditional, Russian, Polish.
9. SupportS 57+ Car Brands , 10000+ Vehicles Models. Works on most 1996 and newer OBDII Compliant vehicles, Cover OBD2/EOBD/JOBD vehicle.
10.More optional reset services and full system functions can be purchased at MALL.
57+ Supported Car Brands, Over 10000+ Vehicles, keep increasing !
LAUNCH CRP129E has wide compatibility rates with several modes
of the OBD2 motor vehicles. The scanner works on pretty much any car made from 1996 and forward, as long as the car has a 16-pin OBD-II port:
Asia: For Acura, for Daewoo, for Honda, for Hyundai, for Infiniti, for Isuzu, for Kia, for Lexus, for Mazda, for
Mitsubishi, for Nissan, for Nissan GT-R, for Samsung, for Subaru, for Suzuki, for Toyota, for Tlisuzu
Europe: For Abarth, for Alfa Romeo, for Audi, for BMW, for Bugatti, for Dacia, for Eu Ford, for Fiat, for Jaguar, for Lancia, for
Mercedes, for Mini, for Opel, for Peugeot, for Porsche, for Renault, for Saab, for Seat, for Skoda, for Smart, for Sprinter, for
Landrover, for Citroen, for Volvo, for VW, for Vauxhall
South America: For GMSA
USA: For Buick, for Cadillac, for Chevrolet, for Dodge, for Ford, for GM, for Chrysler, for Jeep, for Lincoln
Australia: For Au Ford, for Holden
4 System Diagnosis:
1. ABS System
Retrieve ABS codes to tell you where the problem is, then you can fix it.
2. SRS Airbag System
A safety restraint system, is made up of impact sensors, a control module, and the airbags
themselves. This diagnostic device can detect every electronic parameter to check its health status.
3. Engine System
help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle
performance, save energy and reduce exhaust emission.
4. Transmission system
Read and clear codes and view live data in transmission systems, keeps the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.
12 Special Services. Handle Your Daily Car Maintenance.
1. Oil Reset
It is also enabled with an oil service and lamp reset mechanism, a function which ensures that the vehicle engine is maintained in its rightful healthy self.
2. Throttle Adaptation
Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
3. SAS Reset
It helps clear the faulty steering angle sensor memories and plays an important role in the steering angle sensor
calibration.
4. Brake ( EPB )Service
Reset the brake pad after the repairs in electronic parking brake system are done. By using this system, the braking process is therefore made much simpler and easier.
5. TPMS Service
Looks up the tire sensor IDs from the vehicle’s ECU, and performs TPMS programming and reset procedures after tire sensors are replaced.
6. DPF Regeneration
Clear particulate matter from the DPF filter to stabilize the filter performances
7. Injector Coding
Write the new injector numbers into the ECU for accurate communication and injection control.
8. Battery Register & Battery Maintenance
Perform a reset on the vehicle battery for clearing the fault information and re-match the battery. 8. Reset Bleed
9. Reset AdBlue
10. Reset AFS
11. A/F
Please Note： Reset function is not support for all cars, if you are not sure , offer car brand ,model and release year to our for checking
1：Support automatic identification of VIN for the matching of vehicle models. AUTO VIN technology can identify vehicle
make, model, and year information to shorten the vehicle navigation process. Once the system successfully obtains the VIN ( Vehicle Identification Number ) information of the currently identified vehicle, it will continue scanning the vehicle systems. After the scanning is complete, a diagnostic report will be,automatically generated and sent to your email box.
Note: For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN or manually select car software to do it.
2：Live Data Stream Analysis on Graphing Help you fnd out the transient changes of the car and fndoutthe problems not shown on Engine or battery.
3: Full OBD2 Check--Make a Better Detection for Car Engine System!
Read and Clear the fault codes, turn-off Malfunction Indicator Light (MIL)
Built-in DTC look-up library with cause analysis
Request On-Board Monitoring test results for specific monitored systems
Display I/M readiness status. (Non-continuously Monitored Systems Test )
Show Live Data in graphs such as engine RPM, temperatures, ignition advance, speed, etc
Displays Freeze Frame data
Request Vehicle Information
Displays O2 Sensor test results
Special control mode requests control of EVAP test.
4: Measures the current voltage of the vehicle’s battery
5: A quick access to the I/M readiness function of OBD II Diagnosis. I/M refers to Inspection and Maintenance that is legislated by the Government to meet federal clean-air standards. I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing. *Note: This function also can be done by performing "OBD II (Diagnosis)"
6: Automatic Diagnostic Report Share & Print Generate Diagnostic report with one clicj, share the diagnostic report with your friends, find out the problem quickly and easily.
